Yes, we do Dacor appliance repair across Los Angeles. Top Home Appliance Repair fixes Dacor ovens, ranges, cooktops, refrigerators, dishwashers and warming drawers. We have been a Dacor certified service company since 2018. Our technicians work from Dacor’s own service procedures and fit genuine Dacor parts, usually on a same-day appointment. Call 818-855-7988, tell us the model and what it is doing, and you get the quote before any work starts.
Dacor started in Southern California in the 1960s, so there are a lot of them in the kitchens we drive to every day. We see everything from nineties Epicure ranges in Encino to new Modernist columns in Beverly Hills. We are a family-owned company that has been repairing kitchen appliances in Los Angeles since 1980, so an older Dacor does not worry us. If the part is still made, we can usually get it.
Dacor Certified Since 2018
Plenty of companies will take a Dacor job. Certification is different. When we became a Dacor certified repair company in 2018, it meant working to Dacor’s own service procedures. The brand’s technical documentation rides on the truck, and we have access to genuine Dacor parts instead of learning on your range.
On a service call that shows up in small ways. The technician knows which relay board a Discovery iQ wall oven uses before the panel comes off, and orders the part by Dacor’s own number instead of a look-alike. Less guessing, fewer return trips.
Dacor Oven Repair
Ovens are the most common Dacor call we get, and most of them come down to a short list of parts. An oven that will not heat, or takes forever to preheat, usually has a bake element that has gone open. On newer models it may be the hidden bake element under the oven floor, or a relay board that no longer switches power to that element. On a gas oven the usual suspect is the igniter, which still glows but is too weak to open the gas valve. The same checks are on our oven repair page; on a Dacor we know the part numbers before we arrive.
An oven that heats but cooks unevenly is a different job. There the technician checks the oven temperature sensor, which drifts with age and makes the oven overshoot or run cold. The convection fan is next, because it can seize and stop moving heat around the cavity. A door that no longer closes flush points to worn door hinges or a door gasket that has gone hard, and both let heat escape. Error codes and a dead display come down to the control board, the touch panel or the power feed.
Dacor Range and Cooktop Repair
Dacor ranges put a separate spark igniter under each sealed burner. When one burner clicks and will not light, that igniter has usually cracked or taken on water from a boil-over. Otherwise the spark module has stopped feeding that position, or the burner cap is not seated and its ports are clogged. A low or yellow flame on every burner is more often the regulator or the gas valve than the burners themselves. Dual-fuel ranges, with gas burners over an electric oven, get both sets of checks on one visit; our stove and range repair page covers the rest.
Dacor cooktops come in gas, electric and induction. An induction cooktop can stop recognizing a pan, shut itself off mid-cook or throw a code. The cause is usually the generator board, a stalled cooling fan or a temperature sensor under the glass. On electric cooktops it is a burnt radiant element or a failed control switch.
Dacor Refrigerator and Column Repair
Dacor’s built-in columns and French door refrigerators are quiet, well insulated and hard to diagnose from the kitchen side. A good refrigerator repair starts with the symptom. A fresh food section running warm while the freezer stays cold almost always means the evaporator fan has stopped. The other common cause is a failed defrost system and an iced-over coil, so we test the defrost heater, the defrost sensor and the control before anything is replaced. The whole unit running warm, with the compressor hot and clicking, points to the start relay or the compressor itself.
Water and ice problems have their own list. A dispenser that trickles or an ice maker that quits is usually the water inlet valve, a frozen fill tube or the ice maker assembly. Frost on the back wall or sweating on the door means a gasket that no longer seals. On a built-in column the panels, the hinges and the leveling need a careful hand.
Dacor Dishwasher Repair
A Dacor dishwasher that leaves water in the bottom of the tub has a drain pump that has failed or a filter and check valve blocked with food. Dishes coming out dirty on the top rack point to a tired wash motor, a cracked spray arm or an inlet valve letting in too little water. A dishwasher that will not start at all is often nothing more than the door latch or its switch. Leaks at the front are the door gasket; leaks underneath are the pump seal or a split hose. Our dishwasher repair page covers dishwashers of every brand.
Dacor Problems We Fix Most Often
- Oven not heating, slow to preheat or running hot or cold
- Error codes, a dead display or an unresponsive touch panel
- Range burner clicking but not lighting
- Induction cooktop not recognizing the pan or shutting off
- Column refrigerator warm on the fresh food side
- Ice maker or water dispenser not working
- Dishwasher not draining or not cleaning
- Door hinges, gaskets and warming drawer elements
If your problem is not on the list, describe it when you call. Most Dacor faults come down to one part, and the diagnosis tells us which one.
The Dacor Lines We Work On
Good Dacor appliance repair starts with knowing which collection you own. Dacor has sold under several names, and each one has its own habits. Modernist, the current flagship line, has the most electronics, so the control and communication boards are the first things we test. Contemporary is the everyday line and shares many parts with Modernist. Heritage, which used to be called Renaissance, covers the pro-style ranges and wall ovens, where igniters, spark modules and oven sensors do most of the failing. Epicure ranges from the nineties and 2000s keep going as long as someone replaces the igniters and door gaskets. Discovery wall ovens, ranges, induction cooktops and built-in refrigerators, including the iQ controller models, use boards and relays we have replaced many times. We also service Preference and Millennia ranges and the older Dacor warming drawers and ventilation hoods.
Repair or Replace a Dacor Appliance
Dacor kitchens tend to be matched suites built into custom cabinetry, which changes the repair-or-replace math. A new unit rarely drops into an older cutout, and the finish will not match the rest of the kitchen. A column refrigerator is also a two-person install with cabinet work on top. Good Dacor appliance repair almost always beats replacing a matched suite. Unless the sealed system has failed twice or a range has rusted through, we advise keeping the kitchen you designed.
What to Expect on Service Day
When you call for Dacor appliance repair, have the model number handy. It is on a tag inside the oven door, behind the kick plate on a range, or inside the refrigerator, and Dacor’s serial tag guide shows the spot for each product. The technician diagnoses with the panels off rather than from the symptom alone. You hear what failed and why, and you get the quote before any work starts. The inspection and the quote are free when you go ahead with the repair, and seniors, active military and veterans get a discount. When the part is on the truck, the repair is finished the same visit. The technician then runs the appliance through a full cycle before leaving.
Why Choose Us for Dacor Appliance Repair
- Dacor certified since 2018, working to Dacor’s own service procedures.
- Genuine Dacor parts on every repair.
- Same-day appointments where the schedule allows, open 6 AM to 10 PM every day.
- Affordable, reasonably priced repairs, explained before anything is taken apart.
- Our own technicians, never a subcontractor.
- Family-owned, serving Los Angeles since 1980.
Frequently Asked Questions
Are you a Dacor certified repair company?
Yes, since 2018. Certification means the technician follows Dacor’s service procedures and repairs with genuine Dacor parts. That covers the newer Modernist and Contemporary lines as well as the older Epicure and Discovery appliances.
Do you repair older Dacor appliances?
Yes. Epicure, Preference, Millennia and Renaissance appliances are a regular part of our week. Parts for most of them are still available, and where a part has been discontinued we tell you before quoting so you can decide.
My Dacor oven heats, but the temperature is off. What is wrong with it?
Usually the oven temperature sensor, which drifts as it ages and makes the control think the oven is hotter or colder than it is. A convection fan that has stopped and a relay board that sticks produce similar symptoms. The technician measures the actual cavity temperature against the display and replaces the part at fault.
Can you repair a built-in Dacor refrigerator column without pulling it out of the cabinet?
Most of the time, yes. The evaporator fan, defrost parts, water valve, ice maker and gaskets are all reached from the front or from the top grille. Compressor work and some control board replacements need the unit pulled forward, and we protect the floor and the cabinet faces when that is needed.
Can you come out today?
Often, yes. Call in the morning and we can usually offer a same-day visit anywhere in Los Angeles, the San Fernando Valley or the Westside.
Contact Us for Dacor Appliance Repair in Los Angeles
Call 818-855-7988 with the model number and the symptom, or use the form on this page. We will get a Dacor certified technician on the way. We service Dacor kitchens across Encino, Beverly Hills, Bel Air, Brentwood, Pacific Palisades, Santa Monica, Malibu, Calabasas, Sherman Oaks and West Hollywood, along with the rest of greater Los Angeles, Ventura County and the Orange County coast.
